Team Win strives to provide a quality product.  However, it is your decision to install our software on your device.  Team Win takes no responsibility for any damage that may occur from installing or using TWRP.


Support Status: Current

Maintainer: lexingtontezz

Code Name: genevn

Device Tree / files

This device uses Dynamic Partitions

This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.

In order to flash the individual partitions, you will have to boot into fastbootd.

Download Links:

Current and past versions of TWRP can be found at one of the mirrors below:


NOTE: Your bootloader MUST be UNLOCKED before booting or installing TWRP

If you already have TWRP installed:

Download the latest zip and install the zip using TWRP, or flash directly the image directly to recovery in fastboot.

If you do not already have TWRP installed:

Download both the img and the zip. Copy the zip to your device. You will need to have the latest fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader menu. Connect the device to your PC. Open a command window and run the following command from the proper location:

Image Method:

fastboot flash recovery_<slot> path/to/twrp.img

Zip method:

fastboot boot path/to/twrp.img

This will temporarily boot TWRP on your device. Use ADB or MTP to push the zip onto your device:

adb push path/to/twrp.zip /sdcard

Go to install and browse to the zip and install the zip. The zip will install TWRP on recovery partition of both slots.


  • Tezz Dixon
    Merge "fstab: support USB OTG and External SD Cards" into android-12.1

  • lexingtontezz
    fstab: support USB OTG and External SD Cards Initial configuration did not include external SD card loading. The "SD card" being mounted during original testing proved to be internal storage acting as an SD card. USB OTG was set to only mount fat32 devices. Changing to auto should support more filesystem types. Change-Id: Icdb6117f03383d853dc0dda138eb6360a37491b4

  • Tezz Dixon
    Merge "touchscreen: support ilitek touch panel variants" into android-12.1

  • lexingtontezz
    touchscreen: support ilitek touch panel variants Reworked the script logic to load both variants' touchscreen kernel modules. Only the nova_0flash_mmi.ko module needs a manual load of the firmware as the ili8992_mmi.ko module loads firmware automatically. The script runs a quick check for a known value and then loads firmware accordingly. Running both modules showed no issues. Change-Id: Ib38f3adf802c505eb5aae58441efba4fda0e4f91

  • moto
    remove unused make definitions