Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no responsibility for any damage that may occur from installing or using TWRP.
Support Status: Current
Maintainer: Dees_Troy, Mauronofrio
Code Name: enchilada
Current and past versions of TWRP can be found at one of the mirrors below:
OnePlus 6 Install Instructions
Read these instructions and follow them carefully.
The OnePlus 6 uses the newer AB partition scheme first introduced on the Pixel 1. As such there is no recovery partition. Instead, the recovery is part of the boot image. You will temporarily boot TWRP to perform and later perform a more permanent TWRP installation. First download the TWRP zip file directly on your device. If you don't download the zip file to your device first for any reason, you will need to adb push the zip to the device because MTP is not currently working on the OnePlus 6 in TWRP. If you are unable to use adb, you can also use a USB stick with an OTG cable, if you have those handy.
Power off the device. Hold volume up to get into fastboot mode. Run this command on your computer:
fastboot boot twrp-3.2.1-0-enchilada.img
In TWRP, tap on Install and browse to the zip and install it (the zip will probably be in /sdcard/Downloads). TWRP will now be installed to both slots. TWRP is now installed and you can reboot and use your device as normal.
Adjust init values a bit more Change-Id: I071a18b9e15ff0a7da1b4f1b99a7253ca5cb7c93 Signed-off-by: engstk
Add some blu init changes Signed-off-by: engstk
Add some cmdline fixes Signed-off-by: engstk
Add blu_spark r42 custom pie build Signed-off-by: engstk
Set max brightness correctly Signed-off-by: engstk