TWRP for Samsung Galaxy Note 20 Ultra (Exynos)
Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no responsibility for any damage that may occur from installing or using TWRP.
Support Status: Current
Code Name: c2s
Support thread on xda-developers
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd.
Current and past versions of TWRP can be found at one of the mirrors below:
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
Download the Official TWRP App (root required):
Install the app and open it. Agree to the Terms. Select TWRP Flash. Select your device from the device list (c2s) and choose a version. The file will download to your Downloads folder. Browse to and select the file. Tap on Flash to Recovery. Find out more about the app here.
Download the latest image file (.img) from the download link above. Place it in the root of your /sdcard folder and rename it to twrp.img. Run the following commands via adb shell or a terminal emulator app:
dd if=/sdcard/twrp.img of=/dev/block/platform/13100000.ufs/by-name/recovery
postrecoveryboot: logical partition sanitizer Change-Id: Ic2555819fc68e494e8e8f4f811ced530aaa39415
system/bin: remove busybox mount, toybox can trigger rw mounting in lp Change-Id: Iebf5169f2356b9c2cfb1d2378778835408082434
prebuilts: update for may release Change-Id: Ib02988bf77b92a54a47610c7d166059f98004652
BoardConfig: remove BOARD_CUSTOM_BOOTIMG_MK Change-Id: I51082cc8ab13d597dffbcb345a181d6bee4b4c2c
Merge "prebuilts: update kernel according to OneUI 4.1 source drop" into android-11